RF Connectors
      7/16
      BNC/RPBNC
      MC-Card
      MCX
      Mini-UHF
      MMCX
      N-Type
      SMA/RPSMA
      SMB
      SMC
      TNC/RPTNC
      UHF
  RF Adapters
  Cable Assembly
  GPS Antennas
  GSM Antennas
  WiFi Antennas
  Surge Arrestor
  Coaxial Cable

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　
　
   SMA / RP-SMA Connectors
 SMA connector is a type of RF connector developed in the
 1960s to make it easier to coaxial cables.SMA's compact
 design, high durability and outstanding electronic
 performance have made it one of the most widely used
 connectors in RF and Microwave applications across the
 board. Normally utilized in frequency ranges from DC-18
 GHz, there are also precision versions that can reach as
 high as 26.5GHz.
　
SMA connector is available both in Standard and Reverse Polarity. where the male and female interface is  
switched.  Regarding to extensive small scale coaxial which join whorl that has a reliable characteristic with long
life-span that the width, performance are excellent, high frequently. Suitable for the microwave equipment
and body of the digital communication system and join in the cable for the micro-strip line frequency in the
loop frequently. 
　
      Product Online
         Standard SMA
          Reverse Polarity SMA
         SMA catalog online
      
      Features & Benefits
    Broadband performance DC to 18 GHz with low reflection stainless steel construction and ¼ - 36   
          threaded coupling offers high performance in a compact design.
      Available for .085" and .141" diameter semi-rigid cables and all the standard flexible cables including
    double shielded RG-316.
      Low cost Commercial Grade (Brass SMA) available in nickel or gold plating which provides approximately
          30% cost reduction with 250 mating cycles.
　
   General Specification

Electrical

 　
Impedance 50 Ω
Frequency Range .141" & .085" semi-rigid cable: 0-18 GHz;Flexible cables: 0- 12.4 GHz
Voltage Rating 500 V peak
VSWR straight connectors: 1.2 max 0-18 GHz;
right angle connectors: 1.25 max 0-18 GHz
RF Leakage -60 dB minimum
Contact Resistance Center contact: 2.0 mΩ;
Body: 2.0 mΩ;
Braid to body: 0.5 mΩ
Insulation Resistance 5,000 M Ω
Insertion Loss Maximum dB maximum = .03〔[f(GHz)]
Dielectric Withstanding Voltage .141" & RG-58 Cables: 1,000 VRMS
Mechanical 　
Captivated Contacts All types unless noted otherwise
Coupling Nut Retention force Axial force: 100 inch pounds min. (300 N.cm);
Torque: 15 inch pounds min. (76 N.cm)
Mating .250-36 threaded coupling
Connector Durability (mating) 500 mating and unmating cycles at 12 cycles per minute
Material 　
Male Contact Brass
Female contact Beryllium Bronze
Bodies Brass per QQ-B-626
Other Metal Parts Brass per QQ-B-626
Lock Washers Stainless steel, internal tooth supplied with all bulkhead mounted connectors
Gasket Silicone rubber
Insulator PTFE
Crimp Ferrule Copper
　
Notes: These characteristics are typical but may not apply to all connectors.
　
　
　

Copyright © Cmpter Electronics 2010