RF Connectors
      7/16
      BNC/RPBNC
      MC-Card
      MCX
      Mini-UHF
      MMCX
      N-Type
      SMA/RPSMA
      SMB
      SMC
      TNC/RPTNC
      UHF
  RF Adapters
  Cable Assembly
  GPS Antennas
  GSM Antennas
  WiFi Antennas
  Surge Arrestor
  Coaxial Cable

   SMB Connectors
 The SMB was developed in the 1960s out of a need for a
  SubMiniature connector with a quick connect/disconnect
 interface. Slightly smaller than SMA, the SMB's snapon coupling
  mechanism makes it a convenient and reliable solution in
 applications that have space constraints. Found in 50 ohm and
  75 ohm versions, SMB operates in frequency ranges up to 4GHz.
 
  The series of SMB products are that one kind push the locking type joining, it has small, light, electric
 performance a fine characteristic easy to use, suitable for joining the coaxial cable of the radion frequency to
 use in the radion equipment and radion frequency loop of the electron tube instrument.
    
     Product Online
           SMB  connectors
           SMB catalog online
   
     Features & Benefits
         Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high
              quality.
        Quick connect/disconnect snap-on mating reduces installation time.
          Various plating options in nickel, gold, and tin lead. Selective plating provides corrosion resistance finish
             as well as good solderability characteristics.
        SMB PCB slide-on plug and jack allows board-to-board mounting with a low insertion force. This is ideal
              for mating a high number of connectors on a pair of PCB's.
      General Specification

Electrical

Impedance 50 次 or 75 次
Frequency Range 0-4GHz
Dielectric withsanding voltage 750 V rms, 50 Hz(depending on cable)
Working voltage 250 V rms for cables with 1mm/ 0.039 in. dielectric
335 V rms for cables with 2mm/ 0.078 in. dielectric
Insulation resistance ≡ 10000 M次
Contact Resistance
≒ 5 m次
≒ 2.5 m次
Engagement force 8N...63 N / 1.8lbs...14.2 lbs
Disengagement force 8N...63 N / 1.8lbs...14.2 lbs
Contact captivation ≡ 18 N / 4.0lbs
Durability(matings) ≡ 500
Material
Body Brass
Socket contacts copper-beryllium alloy, bronze
Insulator PTFE or PFA
Crimp ferrules  copper/brass
Environmental
Temperature Range -65 ∼C ...+ 165 ∼C/-85∼F ...+ 329 ∼F
Thermal shock MIL-STD-202, Method 107,Condition B
Moisture resistance MIL-STD-202, Method 106
Corrosion Saltspray test acc.to MIL-STD-202
Vibration  MIL-STD-202, Method 204, Condition B
Notes: These characteristics are typical but may not apply to all connectors.
   
      

Copyright © Cmpter Electronics 2010